DUST COLLECTION
EQUIPMENT
DCL is a world leader in innovative dust collection equipment due to its ability to filter material at the source and deposit it back into the material flow. This minimizes loss, eliminates ductwork, and cuts labor costs.
DCL DUST COLLECTION PRODUCTS
The DCL Compact Filter Module and Ventilation Module are available in a choice of construction materials, allowing the handling of all types of products, including fine, granular, lumpy, abrasive, and corrosive materials.
COMPACT FILTER MODULES
Filters dust from a loading spout and discharges particles back into material flow.
VENTILATION MODULES
Filters dust from a single point and discharges particles back into material flow.
DUST COLLECTOR/BIN VENT
Collects dust from multiple transfer points using a series of duct work.
COMPACT FILTER MODULES
The DCL Compact Filter Module (CFM) captures dust directly from the loading spout, filtering it efficiently at the source. The collected dust is reintegrated into the material flow, reducing product loss, minimizing manual handling, and enhancing efficiency at load-out sites.
Available in sizes up to 1,660 sq. ft. of filter media with an air withdrawal capacity of up to 6,000 CFM.
The Compact Filter Module (CFM) is ideal for use inline at any bulk material transfer point requiring dust control when used with a DCL Loading Spout.
The CFM can filter dust at the source using an inline filtration system. This system allows the product to flow through a central flow tube while isolating it from the upward dust-entrained airflow. The collected dust is deposited back into the material being handled, increasing efficiency at load-out sights and reducing the need for manual dumping of the material.
This makes the Compact Filter Module an ideal cost-effective package, especially compared to a free-standing dust collector that utilizes ductwork, a discharge airlock, and often a means of conveying the dust back to the system.
Its low-profile configuration allows it to function in spaces where space is limited. The exhaust fan is directly mounted to the assembly, eliminating the need for remote fan placement. This unique design provides internal velocities lower than what you’d expect in conventional designs. This gives you less load on your filtration media. The filter elements are automatically cleaned during operation with a conventional 80-100 PSI pulse jet system. The unit can also be provided with a final clean feature. When activated at the end of each loading cycle, it fully cleans all elements, eliminating residuals.
Filter media is available to accommodate most applications. Pleated design, spun-bonded media features a smooth surface finish with exceptional dust cake release. The filter surface is calendared and compacted to resist penetration by collected particulate. This results in better cleaning efficiency and faster return to operating airflow after the cleaning cycle than traditional media.
A choice of construction materials allows you to effectively handle all types of products—fine, granular, lumpy, abrasive, and corrosive—and difficult, dusty, or sanitary applications. You can also choose the best electrical options for your environment: NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.
The CFM features up to 1,660 square feet of filter media and supports air withdrawal rates of up to 6,000 CFM.
VENTILATION MODULES
The DCL Ventilation Module provides effective dust control by capturing and filtering airborne particles directly at the source. Designed for seamless integration, it returns collected dust to the material flow, reducing waste, lowering maintenance demands, and improving overall efficiency at load-out sites.
DCL offers a wide range of ventilation modules with filter media sizes from 85 to 750 square feet and exhaust fans with capacities up to 6,000 CFM.
The DCL Ventilation Module captures dust directly at the source, filtering it from a single point and reintegrating particles back into the material flow. Designed for efficiency, it minimizes product loss, removes the need for ductwork, and reduces labor costs.
DCL offers ventilation modules in a wide range of models, featuring 85 to 750 square feet of filter media and exhaust fans capable of handling up to 6,000 CFM.
The VMV and VML Ventilation Modules are an excellent choice for dust control when used directly at the source: conveyor head chutes, ventilation of enclosed conveyors, screeners, mixers, silos, and batching bins. The specially designed pleated filter elements are sized to be easily handled and are replaced without tools. All dust collected by the VMV and VML is deposited back into the material being handled. This makes the DCL Ventilation Module an ideal cost-effective package compared to a free-standing dust collector that would require ductwork, a discharge airlock, and a means to convey dust back into the system.
The exhaust fan is directly mounted to the assembly, eliminating the need for remote fan placement. This unique design provides internal velocities lower than what you’d expect in conventional designs. This gives you less load on your filtration media. The filter elements are automatically cleaned during operation with a conventional 80-100 PSI pulse jet system. The unit can also be provided with a final clean feature. When activated at the end of each loading cycle it fully cleans all elements eliminating residuals.
Filter media is available to accommodate most applications. Pleated design, spun-bonded media features a smooth surface finish with exceptional dust cake release. The filter surface is calendared and compacted to resist penetration by collected particulate. This results in better cleaning efficiency and faster return to operating airflow after the cleaning cycle than traditional media.
DCL offers a large selection of ventilation modules from 85 to 750 square feet of filter media. Exhaust fans can be sized up to 6000 CFM.
A choice of construction materials allows you to effectively handle all types of products – fine, granular, lumpy, abrasive, and corrosive – and difficult dusty or sanitary applications. You can also choose from the electrical options that are best suited for your environment: NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.
DUST COLLECTOR BIN VENT
Collects dust from multiple transfer points using a series of duct work.
Sizes up to 3,000 sq. ft. of filter media with up to 18,000 CFM air withdrawal.
Typically, a dust collector is installed in a remote location. It is fed by ductwork from multiple bulk material transfer points. This traditional type of baghouse dust collector can also be configured as a bin vent for silos.
All DCL dust collector modules are offered in top and bottom filter removal designs as well as walk-in clean air plenums. Exhaust fans can be mounted to the dust collector or next to it. A wide variety of filter media choices are available to suit most dry particle filtering requirements.
A choice of construction materials allows you to effectively handle all types of products – fine, granular, lumpy, abrasive, and corrosive – and difficult dusty or sanitary applications. You can also choose from the electrical options that are best suited for your environment: NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.
DUST CONTROL & LOADING SYSTEMS
The industry leader in dust control and dry bulk loading systems since 1981.